HTM140

Anwendungen
HTM140 is vergleichbar mit RCP30 Nano Cure, hat aber ohne thermische Behandlung einen HTD von 140°C. Mann kan sehr feine Detaillierungen erreichen. Einige Anwendungen:
Gußformen für z.b. Gummi
Testteile zu verwenden in heissen Luft oder heisses Wasser
Testteile für Windkanäle
Mehrere Anwendungen fur die Electronika

Building Resolutions HTM140
Surfaces up to	16μm
Layer Thickness min.	25μm

Classification HTM140
Type	Photopolymer
Colour	Olive green
Classification	N.A.

Eigenschappen HTM140
Properties	Units	Method	Value
Density	[G / cm ³]	DIN ISO 1183-1
Tensile Strength	[MPa]	DIN EN ISO 527-1	56
Elongation at Break	%	DIN EN ISO 527-1	3.5
Flexural Strength	[MPa]	DIN EN ISO 178	115
Flexural Modulus	[MPa]	DIN EN ISO 178	3350
Heat Deflection Temp. (HDT) zonder thermische behandeling	° C	ASTM D 648	140

2012-01-17: added.

All data provided herein, which is related to consumables, was collected from specific specimens and tests conditions and is provided for information only. Characteristics may vary if different specimens and test conditions are applied. Unless expressly provided in writing, no warranties are made and warranties of merchantability or fitness for a particular purpose are expressly disclaimed. All data provided is preliminary and must be verified by the individual user.