R11 ist ein Werkstoff mit guten allgemeinen Eigenschaften; das Material kann angewendet werden für zum Beispiel: |
Gehäuse für die Elektroindustrie |
Medizinprodukte |
Snap-Fit Teile |
verschiedene Anwendungen im Automobilbereich |
Basisteile für Schmuck |
Surfaces up to | 16μm |
Layer Thickness min. | 15μm |
Type | Photo-reactive Acrylate |
Colour | Red |
Classification | N.A. |
Properties | Units | Method | Value |
Density | [g/cm³] | DIN ISO 1183-1 | 1.219 |
Tensile Strength | [Mpa] | DIN EN ISO 527-1 | 54 |
Elongation at Break | % | DIN EN ISO 527-1 | 3.7 |
Flexural Strength | [Mpa] | DIN EN ISO 178 | 87.9 |
Flexural Modulus | [Mpa] | DIN EN ISO 178 | 2250 |
Izod Impact-Notched | [KJ/m²] | DIN EN ISO 180 | 4.59 |
Hardness | Shore D | DIN EN ISO 868 | 87 |
Heat Deflection Temp.(HDT) at 0.46 Mpa | °C | ASTM D 648 | 102.6 |
Heat Deflection Temp.(HDT) at 1.81 Mpa | °C | ASTM D 648 | 88 |
All data provided herein, which is related to consumables, was collected from specific specimens and tests conditions and is provided for information only. Characteristics may vary if different specimens and test conditions are applied. Unless expressly provided in writing, no warranties are made and warranties of merchantability or fitness for a particular purpose are expressly disclaimed. All data provided is preliminary and must be verified by the individual user.
Sehr geehrter Kunde,
Wir freuen uns, dass Sie ein Interesse an unserem Unternehmen haben. Wir sind hier, um Sie ausführlich zu erzählen, was die Möglichkeiten sind von Prototyping und Direct Manufacturing.
Bitte kontaktieren Sie uns noch heute, rufen Sie uns an unter Nummer 0031 77 323 01 20 oder senden Sie ein E-Mail an info@mareco.nl.
Mit freundlichen Grüßen,
Mareco Prototyping B.V.