PIC100 ist für Anwendungen in die verlorene Wachsmethode entwickelt, vor allem für die Produktion von Gold und Silber Schmuck. Es ist ein feines ausbrennbares Material ohne poröse Stellen. Einige Anwendungen: |
Teile mit excellente Detaillerungen |
Basisprodukte für die Schmuckindustrie |
Mikro Siebe, Mikro Bürste u.s.w. |
Surfaces up to | 25μm |
Layer Thickness min. | 25μm |
Type | Photo cured resin |
Colour | Dark Yellow |
Classification | N.A. |
Properties | Units | Method | Value |
Density | [g/cm³] | DIN ISO 1183-1 | 1.178 |
Tensile Strength | [Mpa] | DIN EN ISO 527-1 | 16.8 |
Elongation at Break | % | DIN EN ISO 527-1 | 7.46 |
Flexural Strength | [Mpa] | DIN EN ISO 178 | 23 |
Flexural Modulus | [Mpa] | DIN EN ISO 178 | 404 |
Izod Impact-Notched | [KJ/m²] | DIN EN ISO 180 | 11 |
Hardness | Shore D | DIN EN ISO 868 | 69 |
Ignition Temperature | °C | DIN 53765 | 350 |
All data provided herein, which is related to consumables, was collected from specific specimens and tests conditions and is provided for information only. Characteristics may vary if different specimens and test conditions are applied. Unless expressly provided in writing, no warranties are made and warranties of merchantability or fitness for a particular purpose are expressly disclaimed. All data provided is preliminary and must be verified by the individual user.
Sehr geehrter Kunde,
Wir freuen uns, dass Sie ein Interesse an unserem Unternehmen haben. Wir sind hier, um Sie ausführlich zu erzählen, was die Möglichkeiten sind von Prototyping und Direct Manufacturing.
Bitte kontaktieren Sie uns noch heute, rufen Sie uns an unter Nummer 0031 77 323 01 20 oder senden Sie ein E-Mail an info@mareco.nl.
Mit freundlichen Grüßen,
Mareco Prototyping B.V.